Stihl MS 171 Chain Saw
The STIHL MS 171 is part of a new generation of lightweight STIHL chain saws with reduced emission technology – a significant benefit for users because it saves fuel even as it cuts exhaust emissions. The MS 171 also has the STIHL pre-separation air filter, which can extend filter life up to five times over previous models.
| DISPLACEMENT | 30.1 cc (1.8 cu. in.) |
| ENGINE POWER | 1.3 kW (1.7 bhp) |
| POWERHEAD WEIGHT | 4.3 kg (9.5 lbs.) |
| GUIDE BAR LENGTHS* (Recommended ranges) | 30 to 40 cm (12" to 16") |
| FUEL CAPACITY | 280 cc (9.5 oz.) |
| CHAIN OIL CAPACITY | 180 cc (6.1 oz.) |
| OILOMATIC® CHAIN | 3/8" PMM3 |
Reduced-Emission Engine Technology - Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
Anti-Vibration System
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
STIHL ElastoStart™
The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
Ematic™ Lubrication System
The Ematic™ guide bar when used with STIHL OILOMATIC® saw chain will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
Side-Access Chain Tensioner
The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
Master Control Lever™
The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
**** STIHL products can NOT be shipped. These are on here so that local customers can see what we have in stock. ***